Primegrip professional series work gloves utilize a special blend of polyester and cotton to make the gloves comfortable and durable, allowing you to keep them on for hours at a time. Our selection of textures and coatings ranging from latex to nitrile, to polyurethane can cover a wide range of industries and working environments. Our sizing options guarantee that no hand will go exposed. Gloves that are designed to handle anything nature can throw at you. So, next time you are looking for paw protection, keep an eye out for the Bear Claw.
The Primegrip Badger Mechanics Gloves provide full flexibility and range of motion. This full finger mechanics gloves features spandex liner and padded polyutherance palm with soft grip palm pad. Spandex with polyurethane fingertips and elastic wrist with velcro strap
Made of 16 gauge stainless steel with a powder coat finish.
Features a neoprene gasket to aid placement of the product before applying the screws. This gasket also serves as a buffer between the roof and the snow stop and ensures a watertight seal for screw penetration.
This product is very easy to install. 3 screws per snow guard is recommended when installing this product.
The snow guards are offered in 30 different colors, shades, and 2 finish combinations. Ensuring an optimum range of choices for the most discerning eye when matching a roof's colors.
Includes color matched screws for installation.
Ideal snips for cutting light stock with offset jaws to keep hands up and away from sharp metal edges. Cuts straight and right curves in 18 gauge cold-rolled steel and 22 gauge stainless steel. Offset blades keep hands safely away from material and provide increased reach in tight situations.
Ideal snips for cutting light stock with offset jaws to keep hands up and away from sharp metal edges.Cuts straight and left curves in 18 gauge cold-rolled steel and 22 gauge stainless steel. Offset blades keep hands safely away from material and provide increased reach in tight situations.
Impact ready
High - grade S2 steel
Precision CNC head improves fit and reduces stripping
Magnetized to further assist
Torsion zone absorbs impact and reduces breakage
Black phosphate coating resists corrosion and increases durability
Hex Shank Drill Bits
Drop tested casing
Magnetic Impact Torsion Power Bits 2":
PH1, PH2, PH3, ACR2R(x2), SQ1, SQ2, SQ3
Impact Magnetic Nutsetters 2-9/16":
1/4", 5/16", 3/8"
Impact Socket Adapter 2":
3/8"
Impact Hex Shank Drill Bits:
3/32", 7/64", 1/8", 9/4", 5/32", 11/64", 3/16", 1/4"
Impact Magnetic Bit Holder:
2-1/8"
16 Pc. Variety of Square drive, Crosspoint & 6lobe star tips 2 “ long, impact ready, magnetic tip. bit set, with plastic carry case The perfect accessory for the jobsite or home workshop! Set incudes Square and Crosspoint bits in #1, #2 & #3 tip sizes. And 6lobe T20, T25 & T30 size tips.
10 Pc. #1, 2 & 3 sizes, Crosspoint, 2 “ long, impact ready, & magnetic tip, bit set. Comes with plastic carry case and carabiner clip. The perfect accessory for the jobsite or home workshop! This 10 pack set offers great value for the money.
10 Pc. #1, #2 & #3 sizes, Square drive 2 “ long impact ready, magnetic tip. Bit set, with plastic carry case and carabiner clip. The perfect accessory for the jobsite or home workshop! This 10 pack gives you great value for the money.
Folding utility knife with replaceable blades. This compact knife is very easy to carry in the pocket or on the belt. A combination of stainless steel and TPR make this tool strong, durable and lightweight. It also a features a quick release blade change mechanism and has three SK5 steel blades included. EDGE - Indoors. Outdoors. Everywhere In Between
Vertical offset snips ideal for increased reach in overhead projects, tight spaces or ground level cutting. Cuts straight and right curves in 24 gauge cold-rolled steel and 28 gauge stainless steel. Offset blades keep hands safely away from material and provide increased reach in tight situations.
Vertical offset snips ideal for increased reach in overhead projects, tight spaces or ground level cutting. Cuts straight and left curves in 24 gauge cold-rolled steel and 28 gauge stainless steel. Comfortable non-slip handles. Quick and simple spring-free automatic latch design.
2-in-1 locking seamer for standing seam roof applications. This tool combines the two stages of a double lock seam into a single tool. Lightweight and easy to use - eliminates the need to carry two different locking seamers. Closes the single lock in a standing seam roof. Reverse side completes the double lock.
This tool is used to lock a roof panel around the drip edge on standing seam metal roofs. It is employed in conjunction with a primary bender that creates the vertical leg of the drip edge. Allows clean and fast locking of the drip edge without any tool marks. Can be used to pre-bend or with roof panels in place on the roof. Can be used with gutters in place in most cases.
Primegrip offers a complete line of caulking guns serving the homeowner, the seasoned professional and everyone in between. Professional-grade caulking gun. 18:1 thrust ratio for use with acrylic, adhesives, asphalt, butyl and cement. Quick-twist pressure release. Available in 9" and 13" Includes ladder hook.
This is a complete all-in-one kit for fall protection. It includes a harness, rope grab with a 2' energy absorber, anchorage connector and a 50' lifeline all housed in a 5 gallon storage pail. The kit is fully customizable with a variety of rope lengths and anchor options, and is ideal for nearly any roofing job.
The high leverage Drip Edge Benders are designed to make 1" or 1½" bends in metal panel edges for standing seam roofing applications. Constructed from a lightweight 14 gauge mild steel, this tool can easily be used overhead on installed panels to bend up to 18 gauge material. The high quality spot welding between plates and heat-treated Primegrip green powder-coated finish provides an excellent combination of strength and durability to keep your tool performing longer.
The high leverage Drip Edge Benders are designed to make 1" or 1½" bends in metal panel edges for standing seam roofing applications. Constructed from a lightweight 14 gauge mild steel, this tool can easily be used overhead on installed panels to bend up to 18 gauge material. The high quality spot welding between plates and heat-treated Primegrip green powder-coated finish provides an excellent combination of strength and durability to keep your tool performing longer.
Primegrip hemming tools are designed to facilitate the quick and precise hemming of metal panel edges for use in standing seam roof structures, and can also be used to close the high side of panels. Constructed from 10 gauge mild steel, they feature high quality spot welding between plates and a heat-treated Primegrip green powder-coated finish to keep your tools strong and long-lasting.
Professional series hand seamers with comfortable double-layered non-slip handles and long-lasting heat-treated steel jaws. 2" bend depth. Useful for thicker gauge material. 1/4" precision marks for accuracy. High quality drop-forged steel, fully heat-treated and tempered.
Primegrip hemming tools are designed to facilitate the quick and precise hemming of metal panel edges for use in standing seam roof structures, and can also be used to close the high side of panels. Constructed from 10 gauge mild steel, they feature high quality spot welding between plates and a heat-treated Primegrip green powder-coated finish to keep your tools strong and long-lasting.
The high leverage Drip Edge Benders are designed to make 1" or 1½" bends in metal panel edges for standing seam roofing applications. Constructed from a lightweight 14 gauge mild steel, this tool can easily be used overhead on installed panels to bend up to 18 gauge material. The high quality spot welding between plates and heat-treated Primegrip green powder-coated finish provides an excellent combination of strength and durability to keep your tool performing longer.
Ideal tool for hemming metal panel edges or closing high side of panels for standing seam roof applications. Makes a 1½" bend in a metal panel up to 17¼" wide. 1/8" throat gap allows use with up to 15 gauge material. 10 gauge mild steel construction with heat-treated powder coating finish lends strength and durability to the tool.
Primegrip offers a complete line of caulking guns serving the homeowner, the seasoned professional and everyone in between. 18:1 thrust ratio for use with acrylic, adhesives, asphalt, butyl and cement. Quick-twist pressure release. Includes ladder hook. Available in 9" and 13".
Professional series hand seamers with comfortable double-layered non-slip handles and long-lasting heat-treated steel jaws. Seamer angle allows accurate 90° bends and ease of use in tight areas. Useful for thicker gauge material. High quality drop-forged steel, fully heat-treated and tempered.
Professional series hand seamers with comfortable double-layered non-slip handles and long-lasting heat-treated steel jaws. Seamer angle allows accurate 45° bends and ease of use in tight areas. Useful for thicker gauge material. High quality drop-forged steel, fully heat-treated and tempered.
Professional series hand seamers with comfortable double-layered non-slip handles and long-lasting heat-treated steel jaws. Seamer angle allows accurate 45° bends and ease of use in tight areas. Useful for thicker gauge material. High quality drop-forged steel, fully heat-treated and tempered.
No results match your search. Try removing a few filters.
